Dyer's Docking Systems
About Dyer's Docking Systems Please click
Avalanche 10'&12' Clamshell Trailers Please click
Avalanche Enclosed Trailer Please click
Sled Dock Caps Please click
Sled Dock Trailers Please click
Avalanche Motorcycle Trailers Please click
Custom Trailers Please click
Trailer Repair Please click
Aluminum Leg Standing Docks Please click
Hinged & Rolling Docks Please click
Floating Systems Please click
Aluminum Dock Frames Please click
Harbor Master Boat Lifts Please click
Personal Watercraft Lift Please click
Dock Accessories Please click
Dock Photos Please click
Links You Need: Please click
Directions Please click
Frequently Asked Questions Please click
Sled Dock Frame:
We at Dyer's Docking have nothing to hide. Our Sled Dock Trailers, like all our products, are manufactured to the highest standards in the industry. We construct our trailer with fully welded all Aluminum Box Tube Construction.
Our Wishbone tongue is joined to the full length rails using a nylon bushing and carbon steel bolt. This bolt is one of the few non-stainless steel fasteners used and was chosen for strength verses rust inhibiting factors. Notice we use gas piston tilt assist between the wishbone and frame.
We place our joist every 24" on the rails ensuring strength and durability.
Sled Dock, like all our trailers, are built upon Dexter Torsion Axles with EZ lube. The LED lights and wiring are run to the four wire flat connector.
We then install 5/8ths Marine Plywood for the deck. The length of tie-down track in the front accommodates the Slick Nut Fastening System included.
The Sled Dock Trailer is available in:
We are a proud member of the National Association of Trailer Manufacturers (NATM ) and comply with the guidelines which provide the end user with a safe product that meets or exceeds all federal requirements.
Send mail to
email@example.com with any questions or comments about this